While logging in to my Linksys router I came across Linksys error 2123. While finding a solution for this, I came to the conclusion that I needed to reset my router. But reset does not work either. What should I do now?
Are you also unable to reset your Linksys router? We can provide you with effective solutions to get rid of this trouble. You can easily reset your router by following the hacks listed in this post. Let’s get started.
Linksys Router Can’t Be Reset: Try This!
1. Use the Right Button of Linksys Router
Have you been using the right button to reset your Linksys router? Maybe the button that you are pressing is not the Reset button. This button usually resides inside a pinhole. Thus, look for such a button and then use it to restore the factory settings on your router.
2. Use Correct Object to Press Button
The Reset button is inside a pinhole and hence you can’t press it like other buttons. You need an object that is pointed and sharp and that can enter inside the hole. If you are using a pen or pencil then you are committing a mistake. Such objects won’t reach the button. Take another object that can touch the button and then use it to get the job done.
3. Hold the Button for Sufficient Time
This is to bring to your notice that you should press the button and hold it for some time to complete the reset process. Although you may be pressing the button to reset your router, you may not be holding it for enough time. Looks like you are releasing the button too soon and hence failing to do the job. What you should do now is press the button and hold it for more time. Let the button be held for more than 15 seconds this time.
4. Check Power Supply of Linksys Router
Your Linksys router should be powered on while you are resetting it to the default factory settings. We suggest you check the power supply to the Linksys router now. Check the Power LED on the router. It should be lit. If it is not lit then press the Power on/off button on the router to turn the router on.
Plug the router into another socket as the one that you have plugged it into now might be broken. Therefore, use different sockets to supply power to it. You should also check its power adapter. Make sure that the power adapter that you have used is the one that came along. It should also be inserted correctly and should be nowhere near loose.
After Resetting the Router!
We are sure that by using the tips given above, you will be able to reset your Linksys router with ease. After you have restored the default settings on the router, you should reconfigure it. Use the IP address or web URL to log in to the router and complete the setup process.
To enhance the performance of your router you should go for the firmware update or invest in Linksys Network optimizer. Use the IP 192.168.188.1 to configure the network optimizer.
The Final Note
Coming across issues with a Linksys router is very common. You may need to reset your Linksys router if you are stuck with any trouble. If you find it hard to reset the router then the solutions listed in this guide should be helpful for you.
Read More- Netgear Extender Firmware Update Failure
