Is your Synology router stuck in a constant cycle of rebooting, disrupting your internet connection and causing frustration? This irritating issue can be a result of various reasons, from hardware malfunctions to configuration errors. However, fear not, as there are several troubleshooting steps you can take to resolve this problem and get your router back on track.
But, before you get started, we would like to let you know that the hacks that we are going to discuss here will work for all Synology router models. Therefore, no matter if you have Synology RT6600AX setup done in your house or own another model, you can rely on this post.
Troubleshooting Techniques: Synology WiFi Router Keeps Rebooting:
Firstly, let’s start with some basic troubleshooting that will involve checking of the power supply, examining the firmware version installed on the router, etc. Here’s what you need to do:
-
Check Power Supply and Connections
Ensure that your router is receiving adequate power supply and that all cables are securely connected. A loose power cable or a faulty adapter can cause intermittent reboots. Just in case any damaged cable is found, you must get it replaced with a new one without any delay. Or else, the router will keep rebooting causing other problems.
-
Verify Firmware Version
An outdated firmware can lead to instability issues like the one you are already struggling with. Therefore, you must log in to your router’s admin panel and check for any available firmware updates. If updates are available, proceed to install them following instructions appearing on the router’s dashboard. The complete step-by-step instructions for Synology router firmware update can be checked from the user manual.
-
Factory Reset
Performing a factory reset can often resolve software-related issues. However, keep in mind that this will erase all your current settings, so make sure to back up any important configurations beforehand. You can usually find the factory reset option in the router’s settings menu or by pressing the Reset button on the device itself. However, you are supposed to keep the button pressed for at least 7 seconds. Otherwise, the router will reboot instead of resetting.
If the basic troubleshooting steps fail to resolve the issue, consider the following advanced solutions:
Advanced Tips: Synology Router Keeps Rebooting
-
Check for Overheating
Overheating can cause your router to reboot intermittently. Make sure that the router is placed in a well-ventilated area and not exposed to direct sunlight or other sources of heat. You can also try placing a small fan near the router to improve airflow.
-
Inspect Hardware Components
Examine the router’s hardware components, such as the CPU, RAM, and internal storage, for any signs of damage or wear. Faulty hardware components may need to be replaced to resolve the rebooting issue.
-
Review Network Settings
Incorrect network settings or conflicts with other devices on your network can also cause your router to reboot unexpectedly. Double-check your network configuration and ensure that there are no conflicting IP addresses or network settings. You can also try disabling any unused features or services on the router to see if that fixes the issue. If yes, then try mapping the Synology Network drive on a computer connected to your Synology router.
To Sum Up
In conclusion, dealing with a Synology router that keeps rebooting can be a frustrating experience, but by following these troubleshooting steps, you can hopefully identify and resolve the underlying cause of the issue. Whether it’s a simple power connection problem or a more complex hardware issue, persistence and thoroughness will ultimately lead to a stable and reliable network connection.
