Are you getting a firmware update error while trying to update your Nighthawk router? There is nothing to worry about since you have landed on the right post. We are very sure by the time you are reading the last hack given here, you will gain enough confidence that you can easily update your device without any hassle. Firmware updates are necessary for the best performance of the router. But if you are getting the Nighthawk router firmware update error and can’t complete the process, then it must be bothersome. This particular guide will help you in getting rid of the issue that you are currently experiencing. And once the problem is eliminated, you can easily update your Netgear Nighthawk router.
Netgear Router Firmware Update Failure Issue [Fixed]
- Check Power Supply
The Netgear router ought to be receiving a consistent power supply throughout the firmware update process. In case the power supply is unstable then this is why you are getting an error in updating the firmware. The firmware update process should not get interrupted and fluctuating power supply is the main reason why the process gets halted in between. Therefore, have a look at the power cable and the power socket that you have used to supply power to the Netgear router. If you see there is an issue with the power supply, then get the problem fixed ASAP. Only after the power supply is stable, you should try updating your Nighthawk router.
- Verify Internet Connection
Other than an unstable power supply, poor internet connection is also a cause of firmware not getting updated. You need to check with your ISP to confirm about the same. Give him some time to get the issue fixed if any from his end. Perhaps there is a maintenance going on from his end and hence the internet connection is shaky. You may also need the internet plan upgrade. Make the necessary changes before again trying to update the firmware.
- Reconnect the Devices
Have you connected the networking devices properly? In case the Netgear router is not connected to the modem in a proper manner, then this is why you are getting an error. Ensure to connect them securely and firmly to avoid further issues. Check the Ethernet cable that you have put to use to make the connection between both devices. If it is damaged, then replace it right away. Bring the device closer to each other if they are connected wirelessly. If you own a Nighthawk modem, then access its settings via the Netgear Nighthawk modem login page and see if there is an issue here.
- Check the Downloaded Firmware File
Are you trying to update the firmware using the manual method? Then you might have downloaded the firmware file first. This firmware file varies for different Netgear router models. In case you have downloaded an incorrect file, then you won’t be able to update your router. Make sure that you have the correct file that is meant for the Netgear router model that you own. In case you have a wrong file, then download the correct file now and save it on your PC.
- Do Not Interrupt the Process
Now, again try to update the firmware on your Netgear router. But first, perform a simple reboot process. This is to eliminate any technical glitches from the router. To reboot, you need to power off the router and then power it on after waiting for some time.
After that try to update the firmware on your router using the correct procedure by accessing the Nighthawk router login page. Make sure that the firmware update process does not get interrupted in any way. So do not power off the router or do any other online activity on your computer.
The Closing Note
The process should be able to get completed without any hassle this time. In case you do get stuck this means the firmware on your router got corrupted due to multiple firmware update tries that you did previously. Or maybe the firmware update process got interrupted.
In such a case, you need to reset the router and restore the factory default settings on it. Press the Reset button on the router and do this task. After that, perform the setup process once again.
Thereafter, once again try to update the firmware on your Netgear Nighthawk router. We ar sure you will get succeeded this time for sure.
