The MSRM US302 Wi-Fi extender offers your entire home the finest speed and coverage. Due to its small size, it is easy to incorporate into the design of your home. offering 802.11b/g/n Wi-Fi connectivity and 300 Mbps of Internet bandwidth. Learn the MSRM US302 Extender Setup and link various devices to it, such as a tablet, gaming console, computer, phone, and monitor.
Installation for MSRM US302 Extender
- After opening your MSRM US302, turn it on.
- When you press the button, keep an eye out for the power LED to turn fully green.
- Ensure to put the booster near the router.
- Set up an AP extension to connect.
- Type Ap.setup or 192.168.10.1 after entering to open any online browser.
- To check in, enter your personal information.
- Follow the directions to complete the installation.
- Once it has been separated, your extender can be moved to a different location.
Note: If you need assistance using your wifi range extender, refer to the directions displayed on the screen. For more information, go to ap.setup, the official page.
MSRM US302 WiFi Extender Setup Using a Browser
- The distance that exists between your router and the location where you need internet connectivity must be covered by your extender.
- Grab your laptop or smartphone and check your Wi-Fi list for the MSRM network designation. There could be Wireless-N or Wireless-AC in the broadcast.
- For up to 10 seconds after you join the network, the MSRM may show you without any internet access.
- On the same computer, open a new tab and enter AP into the address bar.
- To complete the setup of the MSRM US302 extender, type OR 192.168.10.1.
- You will be directed to the admin login page where you must input your username and password.
- Select the repeated selection from the list of options by selecting next.
wps button setup of MSRM US302 extender
- The ones that follow are the WPS setup steps for the Wavlink AC1200:
- Start MSRM US302 now.
- Make sure it is not too far from the network in your house.
- Simply press your booster’s WPS icon.
- Press the same WPS button on your home network once more.
- Your repeater has most likely been set up and set up if it displays three straight green lights.
- The wireless transmitter can be unhooked and placed wherever you like.
Updated firmware for the MSRM US302 extender setup
The simple techniques listed below can be used to update the firmware on the MSRM US302 extender:
- The most current firmware file can be obtained on the company website.
- On the app setup screen, enter the extender username and password.
- Open it and then choose “System Tools.”
- The symbol for firmware updates
- After choosing to upgrade, look over the firmware file you received.
- After an update, start the extender.Okay, the firmware for your extension has been correctly setup.
How do I reset the MSRM US302 extender?
- Make sure the Victony extender is correctly connected into the power outlet before attempting to factory reset it.
- Now locate the factory reset aperture on the repeater.
- Furthermore, use a paper clip or needle to push down on the reset hole for 10 to 15 seconds.
- The power led indicator will turn orange when you restart the wifi booster.
- Keep an eye out for a constant green turn on the power line.
- The section that follows this one contains directions on how to install the Victony WIFI extender.
