Saturday, September 23, 2023
HomeTechnologyNetgear EAX15 setup

Netgear EAX15 setup

A Wi-Fi range extender called the Netgear EAX15 is made to boost and expand your current Wi-Fi network. It uses the 2.4GHz and 5GHz bands at the same time, enabling greater coverage and better speeds. The Netgear Installation Assistant is often used via a web browser to connect the extender to your current Wi-Fi network during the very simple setup process. Wi-Fi Protected Access (WPA/WPA2-PSK) security is one of the practical features included with the Netgear EAX15 setup, allowing you to protect your extended network.

How do I login to the Netgear EAX15 extender?

Here are some quick and easy procedures to follow in order to log into your Netgear EAX15 extender:

  • Connect your device to its Wi-Fi network and plug in the EAX15 extender.
  • Open Browser: On the linked device, start the web browser.
  • Enter the address: Press Enter after entering “” in the browser’s address field.
  • Access Page: The login page will appear. Specify your login information.
  • Use the default or customised Netgear extender login credentials.
  • Login: Select “Login” to access the extender settings and make any necessary adjustments.

Note: If you need any assistance regarding your Netgear EAX15 so contact our technician or visit the official website that is setup.

Netgear Eax15 setup via manual method

Here are some quick steps for setup the Netgear EAX15 manually:

  • Wait for the LED to turn completely white before connecting the EAX15 extender to a power supply.
  •  Join the extender’s Wi-Fi network on your device (for example, “NETGEAR_EXT”).
  • Enter “ setup” in the address bar of a web browser after opening it.
  • To finish setup and personalise settings, adhere to the on-screen directions.
  • When configuring the extender, connect it to your current Wi-Fi network by following the on-screen instructions.
  • You’ve finished manually setup the Netgear EAX15 extender once you’re connected. Configure settings as necessary.

Wps setup for netgear eax15 wifi extender

To set up the Netgear EAX15 extender using the WPS button, follow these easy steps:

  • Connect: Make sure the EAX15 extender is connected and turned on.   N
  • Press the WPS button on the extension to activate WPS.
  • To turn on WPS on your router, press the WPS button during the next two minutes.
  • Wait for Connection: When the WPS LED on the extension turns solid, the connection has been successful.
  • Extender Relocation: If necessary, move the extender to a better spot inside the Wi-Fi coverage region.
  • Check for a connection: Determine whether your devices can join the expanded Wi-Fi network.
  • By pressing the WPS button, the Netgear EAX15 extender should now be successfully setup.


- Advertisment -
Google search engine

Most Popular

BAPESTA Hello Kitty Sneakers

Bapesta Shoes:

Bapestas shoes: