Extender is an internet booster which easily connected to the router with the help of Ethernet cable or WPS method. Here, we will discuss about a technical issue extender not working, which is connected to the Linksys router. We will provide reasons why your extender is not working and solutions to fix the issue.
Before starting the article, you have to make sure that the Linksys router is configured from the 192.168.1.1 Linksys router login interface.
Reasons Why Extender Not Working
Here, we present all the possible reasons why your extender is not working which connect with the Linksys router.
- The first reasons which troubles you with the mentioned issue is internet signal blockage.
- The other causing factor is cables are damaged (if using for connection) or the wall socket is damaged.
- If the extender device is connected far from the Linksys router, then weak internet signals can trouble you with the similar problems.
- Outdated firmware version of the router as well as extender can also be a reason why your extender is not working.
- Dust in the ports of the extender or router device also cause you the same problem given above.
- If the router and extender overheat then you will face the similar technical issues like extender or router not working.
So these are the reasons why you can face extender not working issue. Now, we will provide simple to apply troubleshooting tips and solutions, so that you can solve the problem.
Troubleshoot Extender Not Working
1. Be Sure Router is Linked to Modem
Router connects to the modem with the help of Ethernet cable. It must be in good condition and inserted in correct ports. You have to check that the cable is connected to the router WAN port and LAN port of the modem. Also, check that the cable is not damaged.
2. Make Sure Extender Receiving Signals
If you have connected the extender with the Linksys router with the help of Ethernet cable, then make sure it is in good condition.
If you have linked extender to the router through WPS option, then make sure the devices are connected close to each other.
3. Check for Signal Interruption
Electronic devices are the biggest reason of WiFi signal interruptions. So, check if any electronic devices are near to the router or satellite. If you see one, then replace the networking devices to any other place which should be optimal.
4. Reboot WiFi Router and Extender
To reboot, the device you can use two methods which are given down here.
- Find the power button and press it twice. Pressing the button once will turn off the device and hitting it twice will reboot it.
- The second way to restart is unplugging the repeater from the socket and plugging it again in the socket.
5. Reset Extender and Router Device
Sometime rebooting the satellite also failed to deliver the solution. In this type of situation, you can reset the router and extender. To reset, just find the RESET button and long press it.
After resetting device, you must reconfigure the Linksys device and extender by accessing the interface using your computer or laptop.
6. Update After Solving Problem
Router
If the Linksys router not connecting to internet problem is solved, then you must access the interface using linksyssmartwifi.com and update the firmware version. To update, just have a look at instructions given down here.
- Connect your computer and also access the interface using linksyssmartwifi.com.
- Go to the Settings and choose the Firmware tab.
- Here, you can download the latest version of the firmware and install it.
Extender
- Find extender IP address like 192.168.1.1 and search it in browser.
- Reach to the extender interface login page and type username and password.
- Interface dashboard will display on the screen, where you can update the system by going into the Settings> Firmware> Download> Install.
Last End Lines
Here, you have seen reasons why your extender not working, which connected to the Linksys router. We have also provided solutions to fix the problem. Read more.
