Wireless-N WiFi repeater is a networking device that helps to boost your router performance. It provide router WiFi signals a booster and works as an expander so that you can use the internet services anywhere in your house.
It is simple to connect with the router via two different methods; one is through the Ethernet cable and other is via WPS method. After the connection you have to complete the Wireless-N WiFi repeater setup by configuring it.
But here in this article, you will get to know about Wireless-N repeater troubleshooting tips that help to make the router to extender connection stronger and reliable.
Troubleshooting Tips
Here we will provide tips and solutions, so that you can make your home network secure and make its performance better.
Never Use Damaged Cable
You must use the Ethernet cable and electric socket which are in good condition. If you found any damage in above given things, then replace it right away. If you are using the WPS option, then you must plug the repeater close to the WiFi router device.
Correct Port Selection
The router to extender connection established with the help of Ethernet cable or with the WPS option. If user chooses to link the devices via cable, then you must check the cable is inserted in the WAN port of the extender and LAN port of the router.
Dispel Networks Blockage
Interruptions to WiFi signals can cause by electronic devices like microwave ovens. If you see any electronic device near to the extender then, find another location for your networking device to plug in. But it must be far from the microwave ovens or any other electronic device.
Reboot Wireless-N Repeater
Restarting the repeater will refresh all the settings of the device. So, to dispel the issue, restarting should be the first choice. To reboot the device just follow the steps written below.
- Find the power button of the repeater.
- Press the button twice.
- One time press will turn off the device and second press will restart the device.
Reset Wireless-N Repeater
You can easily reset the WiFi repeater with the help of below given steps.
- You have to use a pin to start the process.
- Find the RESET pinhole button at the side of the extender.
- Long press the button with a pin for about 5-10 seconds.
- Then, wait for some time, and its memory will be wiped out.
After completing the reset process, you must adjust the settings and networks again by going into interface of the Wireless –N range extender.
Repeater Firmware Update
It is easy to start the update of the repeater, just access the interface first. You must use a computer and do the same task like 192.168.10.1 WiFi repeater setup.
- Go to the Settings and scroll to the Firmware option or tab.
- Enter to the Firmware tab, and search for latest version of the firmware.
- If it is available then download it and upload the file in the same tab.
- Click install to start the update.
After some minutes, update will complete. The device will reboot to install the new updates, so do not turn off the computer or repeater in between the process.
Ending Section
In this above written article, you have seen and learned troubleshooting tips and solutions that help your home internet network grow and stronger. These tips include correcting pots connections, dispelling network blockage, rebooting repeater, resetting device, and updating firmware of the Wireless-N repeater.
