Setek WiFi extender is the only option to say goodbye to the dead spots of your house. But, after performing Setek extender setup process, if you are not enjoying the stable internet connectivity, and instead it (the extender) stops working all of sudden or giving you Setek blinking blue light issue to experience, then nothing can be more annoying than this, right? Yes? Need not to worry! To make your WiFi extender up and running in minutes, you should make your way to the fixes outlined underneath. Given that, let’s start over!
Setek WiFi Extender Not Working? [Why]
The reasons that are not allowing your range extender to work properly are given below:
Reason 1: Insufficient power supply: Your Setek extender needs a proper power supply to work properly. It looks like your device is not getting it. If it is getting, then your extender should be working already. But, it is not!
Reason 2: Bad location of extender: Another common reason why your extender is not working is that its WiFi signals are getting interrupted by interference-creating devices in your home like Bluetooth speakers, baby monitors, Alexa devices, and so on.
Reason 3: No connection between your router and extender: If you have not connected your WiFi extender and router, then also you will have difficulty in making the most of it (the extender).
Reason 4: Technical glitches: One of the utmost reasons causing Setek WiFi extender not working issue are technical glitches.
Reason 5: At last, Setek WiFi extender setup process not performed in a proper manner. It seems like – either you followed the wrong instructions to set up the extender or missed a step or two while executing the process.
These are the reasons that are not allowing your Setek WiFi extender to work properly. Now, head over to the next section and know how to make your extender working in minutes.
[Fixed] Setek WiFi Extender Not Working Issue
Here are the fixes that can make your WiFi extender working in minutes.
Check the Extender Wall Socket
Start troubleshooting the issue by checking the wall socket to which you have habe plug in your Setek WiFi extender. In case you find that the wall socket is damaged or not providing your range extender stable electricity, you need to replace it or call up an electrician to fix it.
Now, check if your extender is receiving an adequate power supply or not. If your answer no, then following the next troubleshooting hack will bring you some luck.
Restart Your Setek WiFi Extender
Your WiFi range extender may not work because of technical glitches. To keep these glitches at bay, it is suggested to restart your WiFi extender.
The instructions to restart your range extender are right here. Scroll down a little!
-
Unplug your Setek range extender.
-
Wait for 5-15 minutes.
-
Plug in back your Setek extender again.
We hope that this proves helpful?
Relocate Your Setek WiFi Extender
Bluetooth speakers, baby monitors, Alexa devices, smart HDTV, and so on may interfere with your range extender’s WiFi signals, preventing it from working in a proper manner.
No worries! To get rid Setek WiFi extender not working error and to make the most out of your device, it is suggested you change the extender’s present location. Also, you must place your extender at the center-most and higher area of your home, and away from the interference-creating obstructions listed above.
Connect Your Setek WiFi Extender and Router
The best place for your Setek WiFi extender to place is near to your host router. On the off chance, your devices are placed at an excessive distance, they will not communicate with each other in a proper way. So, plug them in closer and press the WPS button on them one by one. In this way, you will connect your devices wirelessly.
Reset the Setek Extender
In view of you reading this troubleshooting tip, we are assuming that you are still struggling Setek WiFi extender not working issue, right? If yes, then to get rid of it, we suggest you consider resetting your Setek WiFi extender back to its default factory values. You can factory reset your device by pressing and holding its reset button for 10 seconds, and releasing it after that.
Once you are done resetting your Setek WiFi extender, configure it from scratch via 192.168.10.1 IP.
To Sum Up
Now, we are about to conclude this troubleshooting guide. Anticipating that, Setek WiFi extender not working issue is not troubling you anymore. If the extender has started working, then you are free to enjoy seamless internet on your client devices from any nook and cranny of your house.
