Wednesday, April 17, 2024
No menu items!
No menu items!
HomeTechnologyNetgear EAX15 Setup | AX1800

Netgear EAX15 Setup | AX1800

The Netgear EAX15 extender Setup is a dual band. Installing this strong WiFi 6 mesh extender in your house will increase the amount of internet coverage over the whole space and provide fast WiFi speed. Everything you need to know about the Netgear EAX15 WiFi mesh extender is available on this page.

Netgear EAX15 EXtender Setup | AX1800 Manual Guide

  • The Netgear EAX15 should be plugged into a power source.
  • Use an Ethernet cable or Wi-Fi to connect your device to the EAX15.
  • Use a web browser to navigate to the Netgear EAX15 configuration page by entering the IP address by default, 
  • which is usually 192.168.1.250 or mywifiext.
  • Use the default username and password to log in, which are often “admin” for both.
  • To manually configure your EAX15, including Wi-Fi connections and security options, follow the setup tutorial.
  • While you wait for the EAX15 to reset, save your settings.
  • After you’ve rebooted, check that your connection is configured properly.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is mywifiext

Netgear EAX15 EXtender Setup | AX1800 WPS Guide

  • The Netgear EAX15 should be plugged into a power source.
  • The WPS button on the EAX15 should be pressed.
  • Click your router’s WPS button within two minutes.
  • Watch for the EAX15’s WPS LED to solidly turn white, confirming a successful connection.
  • Steps 2-4 must be repeated if the connection is lost.
  • After connecting, move the EAX15 to the best spot for more Wi-Fi coverage.
  • To make sure the extender is operating properly, test your connection.

How To Login Netgear EAX15 Extender .

  • Use an Ethernet cable or the NETGEAR_EXT Wi-Fi network to connect.
  • Start your internet browser and type 192.168.1.250 or mywifiext.net setup into the address box.
  • Use the standard username and password to log in.
  • Select or tap “Log In.”
  • Open the Netgear EAX15 setup page.
  • Set up the extender as necessary.

How To Update Firmware Netgear EAX15 Extender ?

  • Use an Ethernet cable or the EAX15 Wi-Fi network to connect your device.
  • Launch a browser and navigate to mywifiext.net login or 192.168.1.250.
  • Enter your password and username to log in.
  • Go to Maintenance or Settings and choose Firmware Update.
  • If there is an update available, click Check for Updates and follow the on-screen directions.
  • After the upgrade, restart the extender for the modifications to take effect.

Reset Process Netgear EAX15 | AX1800

  1. Find the EAX15’s reset button.
  2. Put a paperclip or other such device into the reset hole.
  3. Hold down the reset button for close to ten seconds.
  4. After the power LED blinks, release the reset button.
  5. A reboot that returns the EAX15 to its factory settings should occur soon.

 

RELATED ARTICLES
- Advertisment -
Google search engine

Most Popular